WMS Dimension

Author:Yewondwossen Assefa
Contact:yassefa at dmsolutions.ca
Last Updated:

08/10/2013

Introduction

A WMS server can provide support for several type of dimensions such as time, elevation or other types of dimensions (for example, satellite images in different wavelength bands). For temporal dimension, please refer to WMS Time Support. This document describes support for the elevation dimension and other type of dimensions

Enabling Dimension Support in MapServer

Setting Up a WMS Layer with dimension support

To have a valid WMS layer with dimension support, the user has to define the following metadata at the layer level:

  • wms_dimensionlist: (Mandatory) comma separated list of dimension names available for the layer
  • wms_[dimensionname]_item: (Mandatory) this is the name of the field in the DB that contains the dimension values.
  • wms_[dimensionname]_units: (Mandatory) Attribute indicating units of dimensional axis. If the dimensional quantity has no units (e.g. band number in a multi-wavelength sensor), use the null string: “”. If the dimensional quantity has units, unit names should be taken from the Unified Code for Units of Measure (UCUM) if UCUM has an appropriate entry. When UCUM is used, the mandatory units attribute shall be an appropriate entry from the UCUM “name” column.
  • wms_[dimensionname]_extent: (Mandatory) defines a valid set of values for the dimension
  • wms_[dimensionname]_default: (Optional) this value is used if it is defined and the dimension value is missing in the request.

Spécifier les étendues de la dimension

Dimension Extents can be declared with the following syntax for the wms_[dimensionname]_extent metadata (see Annex C.3 in the WMS 1.1.1 specification document for a full description):

  1. value - une valeur unique.

  2. value1,value2,value3,... - a list of multiple values.
  3. min/max/resolution - an interval defined by its lower and upper bounds and its resolution. This is supported in MapServer (note that the resolution is not supported however).
  4. min1/max1/res1,min2/max2/res2,... - a list of multiple intervals.

Exemple de couche de serveur WMS

LAYER
  NAME "lakes_elev"
  METADATA
    "wms_title"         "Lakes"
    "wms_description"   "Lakes"
    "wms_dimensionlist" "elevation, text_dimension"
    "wms_elevation_item" "ELEV"
    "wms_elevation_extent" "500, 490, 480"
    "wms_elevation_units" "meters"
    "wms_elevation_default" "500"
    "wms_text_dimension_item" "text_dimen"
    "wms_text_dimension_extent" "first, second, third"
     "wms_text_dimension_units" "my_units"
     "wms_enable_request" "*"
  END
  TYPE POLYGON
  ..

END

Sortie de GetCapabilities

If your layer is set up properly, requesting the capabilities on the server outputs one or several Dimension elements. Here is an example of a GetCapabilities result for a layer configured for two dimensions (wms 1.3.0):

<Layer queryable="0" opaque="0" cascaded="0">
    <Name>lakes_elev</Name>
    <Title>Lakes</Title>
    <CRS>EPSG:4326</CRS>
    <EX_GeographicBoundingBox>
    <westBoundLongitude>0.000178263</westBoundLongitude>
    <eastBoundLongitude>0.0034202</eastBoundLongitude>
    <southBoundLatitude>-0.002134</southBoundLatitude>
    <northBoundLatitude>0.000313775</northBoundLatitude>
    <BoundingBox CRS="EPSG:4326" minx="-0.002134" miny="0.000178263" maxx="0.000313775" maxy="0.0034202" />
    <Dimension name="elevation" units="meters" default="500" multipleValues="1" nearestValue="0">500, 490, 480</Dimension>
    <Dimension name="text_dimension" units="my_units"  multipleValues="1"  nearestValue="0">first, second, third</Dimension>
</Layer>

Supported Dimension Requests

A request parameter name is constructed by concatenating the prefix “dim_” with the sample dimension Name (the value of the name attribute of the corresponding <Dimension> and <Extent> elements in the Capabilities XML). The resulting “dim_name” is case-insensitive. The use of the “dim_” prefix is to avoid clashes between server-defined dimension names and current or future OGC Web Service specifications. (Time and Elevation, being predefined, do not use the prefix.) (section C.4.2)

  • single value: for example: ...&elevation=500&...
  • multiple values: for example: ...&dim_text_dimension=first,second&...
  • single range value: for example: ...&elevation=480/490&...
  • multiple range values: for example: ...&elevation=480/490,490/500&...

Traitement des requêtes de dimension

When MapServer process a valid dimension wms parameter, It will process it into expressions and set it on the LAYER FILTER object. If there was already a Logical “MapServer expressions”, It will be concatenated with it.

For example a request such as &elevation=490/500&... on a MapServer layer (with an empty FILTER) would give .. code-block:: mapfile

FILTER (([ELEV] >= 490 AND [ELEV] <= 500))

For example a request such as &elevation=600&... on a postgis layer with an existing FILTER would give .. code-block:: guess

  • FILTER (elev > 500) #avant requete

  • FILTER ((elev > 500) and (((ELEV = 600)))) #apres requete